Hullo! Handy Sandy here!! (thanks for that nic-name Droopy!) I thought I'd give an update on the bathroom reno. It's been a bit slow going... It's not beary exciting watching paint dry! But here's where we're at...
So,,, here are our DIY shaker cabinet doors - they turned out pretty good!
And here we have the side of the white cabinet... It used to be the same oatmeal colour as the wall - This will be much better!
This bathroom reno all started because we wanted to change the shower/tub surround... and the tub was kind of beat-up...
The grout has cracks and there are some broken tiles... so we know there's water back there somewhere...
Back in the day, these tiles would have been pretty chic... and the tub probably had sliding glass doors as well... oh-la-la...
Maybe I could use the tiles to make photo frames?
Anyhow... Once we decided to do the tub surround... then we might as well pull the tub... and then the laminate floor should come up (laminate not good in bathrooms)... and we might as well paint... and put up new trim around the doors and windows and baseboards.
So there is a lot of painting going on...
But here is where we are at so far with the cabinet. The backs of the doors still need to be painted.
But now we can start to paint the walls... which means the toilet has to come out... This is a beary messy job... and stinky too... I recommend that all stuffies stand a good distance away.
First you turn off the water shut off, then you disconnect the hose thingie... and catch any water in a bucket... then you unbolt the toilet from the floor.
So far so good...
Then you man handle the toilet out of there... and shove a rag in the hole so you don't get overcome by sewer gases! You'll need a new wax ring for the toilet base too...
We put the toilet in the tub and tilted it back and forth to get most of the icky water out. Ick!!
And then there was some painting! The paint is called "Cloud of Volcani Ash... which is a light grey. We had to take the light fixture off the wall to paint around there (cause it's a smaller base than the brass one that was there before). If I turn on the flash, the walls just look blue... which is NOT the colour. So... that is where things are at!








